25" PREMIER 4 Laminator
The Ledco Premier 4 is a revolutionary laminator for any medium duty job.
the Premier 4 is a 25 inch width. A commercial evolution on medium-duty laminator,
designed for commercial applications setting a benchmark for quality,
durability and reliability. 2 year factory warranty.
An evolution in medium-duty laminators
Commercial users needing quality of finished lamination, variable
speed to 10 fpm, digital controls for temperature control, inline
slitters, forced air cooling, rubber rolls are spring loaded and preset
for even laminating pressure. Reverse switch on motor and pressure
release control on rollers making it easier to clear film. Maximum film
gage 10 mil, maximum laminating thickness 1/8 inch.
The Premier 4 represents an evolution in medium-duty laminators,
because it was designed exclusively for commercial applications, and
because it sets a new benchmark for quality.
Whether it's judged by appearance, by ease-of-use, by durability and
reliability, by the finished lamination, or by overall capabilities, the
Premier 4 is unparalleled quality.
Commercial users must have that quality to help them satisfy their
customers. The Premier 4 was made specifically for copy shops, print
shops, business service centers, laminating services, school supply
stores, sign/banner shops, in-house graphics departments, and other
commercial users with similar needs.
Premier 4 Standard Features
Standard features that contribute to the superb quality and versatility of the Premier 4 include:
- Variable Speed: Operates at any speed up to 10
feet per minute. Thicker films are generally applied better at mid-range
to lower speeds, while 1.5 mil film should be applied at mid-range to
higher speeds.
- Digital thermometer and temperature control:
Makes it easy to set and maintain the right temperature. The digital
indicator light flashes as the machine warms up. At set temperature the
indicator light stops flashing and a ready light comes on.
- Simple controls: Membrane switches provide a
compact, reliable control pad. Icons and international symbols are used
for controls and safety warnings so that understanding operation of the
laminator is "intuitive" and not language dependent.
- Slitters: Experts know the value of slitters for
laminating a quantity of same-size sheets. The slitters remove the side
scrap from both sides of each sheet as it goes through the laminator.
This greatly reduces the amount of time required for trimming.
- Glitch-proof threading: Threading can be the most
difficult aspect of using a laminator, so the Premier 4 has built-in
threading aids. The top idler is guarded from the top heat shoe for
safety and easy threading. The bottom idler is attached to the feed
tray. Once the upper and lower webs of film have been run through the
machine, bottom idler threading is automatic when the operator puts the
feed tray on the machine.
- Forced air cooling: Allows laminating with
thicker films. Without a cooling system, thicker films will warp or
ripple because they are still too hot when they come out the back of the
laminator. With its four fans, the Premier 4 has a more effective
cooling system than any other machine in its class.
- Ease of cleaning: The silicone rubber rollers and
the heat shoes of a laminator should be cleaned regularly. The upper
heat shoe on the Premier 4 swings away in seconds, making it far easier
to clean the laminating rollers and the shoes.
- Attached safety shield: The polycarbonate shield
is clear so operators can see their work. It does not conduct heat so
they'll be protected from hot areas. It's fixed to the machine and
placed so they'll naturally put it in the guard position before
laminating.
- Lamination pressure: The rubber rollers are
spring-loaded and preset to ensure correct and even lamination pressure.
The pressure is easy to adjust if required.
- Supply roll tension: Simple knobs give operators
the control they need to get wrinkle-free lamination ... just tighten to
increase tension, loosen to decrease tension.
- Ease of maintenance: Like the Premier III, the
Premier 4 is made to last. However, some items on a laminator do wear
out. Even the high-quality silicone rubber used in the rollers loses
flexibility over time. Extensive use may wear out the rollers, or an
operator may cut a roller by accident. Rollers and other key parts can
be changed quickly without dissembling the frame.
- Reverse: Can be invaluable at times to help avoid problems or clear miss-feeds.
- Pressure release control: Makes it easier to clear film and allows the rollers to turn during warm-up.
- Right and left adjustable feed guides.
- Made in the U.S.A. All parts, even motors and controls, are made here too!
Premier 4 Options
- Roll feed tray: When laminating a very long item
such as a banner, it is just about impossible to feed it in perfectly
straight by hand. By rolling it up on an empty laminating film roll core
and putting that core on the roll feed tray, laminating the longest
item becomes relatively easy. The roll feed tray is especially helpful
for the owners of poster printers, plotters, banner makers and other
digital output devices.
- Footage Counter: For measuring film usage in feet. Also available in a metric version.
- Dust cover: Helps keep the machine clean while not in use, making an inexpensive contribution to good preventive maintenance.
With a Premier 4 . . . you can preserve and protect:
Signs |
Posters |
Charts |
Flash Cards |
Visuals |
Awards |
Games |
Licenses |
POP Displays |
Instructional Material |
Safety Warnings |
Luggage Tags |
Photographs |
Promotional Items |
Dry Erase Charts |
Teaching Aids |
Flyers |
Art Work |
Reports |
Menus |
Name Tags |
Certificates |
Price Lists |
Sales Aids |
Memorabilia |
Book Jackets |
Place Mats |
News Clippings |
Public Notices |
Bookmarks |
Presentations |
ID Cards/Badges |
Specifications
Max. lamination width |
Up to 25" |
Dimensions |
32L 11H 16D |
Weight/shipping wt. |
84 lbs. |
Shipping size |
37L 18H 16D |
Speed |
0 - 10 feet per minute |
Electrical |
110 V (220 V optional)
1560 watts
15 amps |
Max. film gauge |
10 mil |
Max. laminating thickness |
1/8" |
Max. film roll diameter |
1-1/4" |
Max film capacity |
with 1.5 mil - 1000 feet
with 3 mil - 500 feet |
Lam. roll diameter |
1 1/4" |
Film core size |
1" |